CN
Service hotline400-0512-891
High Temperature Electroplating Heat Pump
Immediate consultation
Product parameters
Product model KFXRS-030H-LG KFXRS-050H-LG KFXRS-060H-LG KFXRS-070H-LG
Standard configuration Sheet metal Galvanized sheet/spraying Galvanized sheet/spraying Galvanized sheet/spraying Galvanized sheet/spraying
Fuselage size (W*D*H) 710*710*820 800*800*1070 800*800*1070 800*800*1070
Compressor Valley wheel ZW34KA*1 Valley wheel ZW61KA*1 Valley wheel ZW72KA*1 SANYO C-SBR-235*1
Power Supply 220V/50Hz 380V/50Hz 380V/50Hz 380V/50Hz
Condenser High efficiency tank
155HD-050*1
High efficiency tank
155HD-070*1
High efficiency tank
155HD-090*1
High efficiency tank
155HD-090*1
Evaporator (fin) 550-670-550*750
U-1.3/Φ9.52/25U
580-700-580*900
U-1.3/Φ9.52/25U
580-700-580*900
U-1.3/Φ9.52/25U
580-700-580*900
U-1.6/Φ9.52/25U
Liquid accumulator Effective Tank Effective Tank Effective Tank Effective Tank
Gas-liquid separator LF8W5A-03A*1 KFR120WLG-A*1 KFR120WLG-A*1 KFR120WLG-A*1
Four way valve Three flowers SHF-11-45D1*1 Three flowers SHF-20A-46*1 Three flowers SHF-20A-46*1 Three flowers SHF-20A-46*1
Expansion valve 2.4 3.2 3.2 3.2
Unit access power line 3*2.5mm² 3*4mm²+2*2.5mm² 3*6mm²+2*2.5mm² 3*6mm²+2*2.5mm²
Technical parameter Rated calorific value (KW) 8 14 16 18
Heat input power (KW) 3.1 5.4 6.3 7.1
Rated current (A) 13.5 11 12.5 14
COP (Unit Energy Efficiency) 2.58 2.59 2.54 2.54
Supply water temperature(°C) 80 80 80 80
Maximum effluent temperature(°C) 85 85 85 85
Water flow (L/H) 106 185 212 238
Waterproof grade IPX4 IPX4 IPX4 IPX4
Anti-shock Grade I I I I
Noise (dB(A)) ≤55 ≤58 ≤58 ≤58
Net/Gross Weight (kg) 90/96 125/135 135/145 135/145
Nozzle size/internal teeth (mm) DN25 DN25 DN25 DN25
           
Product model KFXRS-100H-LG KFXRS-140H-LG KFXRS-200H-LG KFXRS-240H-LG
Standard configuration Sheet metal Galvanized sheet/spraying Galvanized sheet/spraying Galvanized sheet/spraying Galvanized sheet/spraying
Fuselage size (W*D*H) 1500*690*1060 1500*800*1560 1850*1000*1950 2000*1100*2080
Compressor Valley wheel ZW61KA*2 SANYO C-SBR-235*2 Valley wheel ZW61KA*4 Valley wheel ZW72KA*4
Power Supply 380V/50Hz 380V/50Hz 380V/50Hz 380V/50Hz
Condenser High efficiency tank
155HD-070*2
High efficiency tank
224S100*2
High efficiency tank
155HD-070*4
High efficiency tank
155HD-090*4
Evaporator (fin) 2-510-590*900
L-2/Φ9.52/25U
2-650*1260
V-3/Φ9.52/25U
2-900*1500
V-3/Φ9.52/25U
2-900*1700
V-3/Φ9.52/25U
Liquid accumulator Effective Tank 145VW-B04-A*2 Effective Tank Effective Tank
Gas-liquid separator KFR120WLG-A*2 KFR120WLG-A*2 KFR120WLG-A*4 KFR120WLG-A*4
Four way valve Three flowers SHF-20A-46*2 Three flowers SHF-20A-46*2 Three flowers SHF-20A-46*4 Three flowers SHF-20A-46*4
Expansion valve 3.2*2 3.2*2 3.2*4 3.2*4
Unit access power line 3*10mm²+2*4mm² 3*10mm²+2*4mm² 3*16mm²+2*6mm² 3*16mm²+2*6mm²
Technical parameter Rated calorific value (KW) 28 36 56 64
Heat input power (KW) 10.8 14.2 21.6 25.2
Rated current (A) 22 28 44 50
COP (Unit Energy Efficiency) 2.59 2.54 2.59 2.54
Supply water temperature(°C) 80 80 80 80
Maximum effluent temperature(°C) 85 85 85 85
Water flow (L/H) 370 476 741 847
Waterproof grade IPX4 IPX4 IPX4 IPX4
Anti-shock Grade I I I I
Noise (dB(A)) ≤66 ≤68 ≤68 ≤72
Net/Gross Weight (kg) 280/295 372/412 482/532 582/642
Nozzle size/internal teeth (mm) DN32 DN50 DN50 DN65
  Ambient Dry Ball Temperature: 20 C Ambient Wet Ball Temperature: 15 C Water Temperature Initial Temperature 15 C Water Temperature Termination Temperature 80 C
  Note: When the ambient temperature is above 5 degrees C, When the temperature of hot water is above 70 degrees C and the ambient temperature is above 10 degrees C, Hot water temperature can reach above 80 degrees C.    
  ※The above parameters are for reference only. With the technological improvement, the parameters will be changed. No further notice will be given. Please refer to the nameplate parameters.
Product introduction

At present, the practical application of high temperature air source heat pump in engineering mainly has the following forms:

1. Renovation of coal-fired or oil-fired (gas) boilers: directly replacing heating boilers. Henan High Temperature Heat Pump Brand has the advantages of less land occupation, less engineering volume, environmental protection, safety and low operating costs. It can directly heat the system without revamping the terminal system. Although the one-time investment is higher than that of ordinary heating boilers, its operating costs are only limited. It is equivalent to 60% of coal-fired boilers, and its increased investment can be recovered within three years.

2. Direct one-off choice: in some special industries, the production water with hot water temperature above 60 C is needed, such as electroplating, chemical industry, bleaching and dyeing industry, etc.

3. Combination with solar heating system: At present, solar energy is more and more used in building hot water supply and air-conditioning heating system, heat pump, but because of the instability of solar energy resources, it basically needs conventional energy as auxiliary heating, such as electric boiler, oil (gas) boiler. The combination of high temperature air source heat pump and solar energy for building hot water supply and heating system can save a lot of energy costs and reduce environmental pollution on the one hand; on the other hand, the low temperature requirement for solar hot water can greatly improve the heat absorption efficiency of solar collector while meeting the heating temperature and reduce the heat absorption efficiency of solar collector. Investment in collectors.

Greenhouse greenhouse heating: Even in the cold winter of northeastern China - 30 C, when the sun is abundant, the temperature in Henan high temperature heat pump project is as high as 50 C, but the temperature in the greenhouse is 30 C, and in the evening, the high temperature will open the window. Without sunshine, although there are insulation measures, it also needs to be heated by fire. Heat pump water heater is used to make underground water storage tank and extract excess heat during the day to make hot water storage in the tank. At night, the heat energy in hot water is extracted and sent to greenhouse by fan coil unit to maintain the reasonable low temperature of biological growth, which constitutes a virtuous cycle of energy saving.

Product advantage

Advantages of High Temperature Heat Pump

1. High temperature of hot water output: high temperature of hot water output is 85 C. At present, the urban coal-fired heating system is being reformed. In order to adapt to the indoor terminal equipment of the original heating system, it is necessary to have a higher hot water temperature. Hebei high temperature plating heat pump and high temperature heat pump have this characteristic.

2. Low operating costs: using high temperature air source heat pump equipment, at 20 ~C ambient temperature, produces hot water at 75 ~C, which costs only 40% of electric heating and 60% of fuel oil (gas).

3. Using special refrigerant, the heat transfer efficiency is high, the environment is not polluted and the environment is green.

Application Form of High Temperature Air Source Heat Pump System

High temperature air source heat pump (HTASHP), as a kind of heat supply and refrigeration technology of university, environmental protection and energy saving, can be applied to all heating, air conditioning and hot water supply systems, and can be organically combined with other new energy technologies to improve the efficiency of comprehensive utilization.

Selection reference
Previous:Nothing
Next:High temperature hot water
Telephone consultation
Products
Case
Home

Online consultation, here

Online consultation

Official Subscription Number

Return
Top